AquaPruf 7600 Ultimate Conveyors

  • 7600 Ultimate Flat Belt
    Frame is designed with no horizontal surfaces for optimum cleaning.
  • Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
  • 7600 Ultimate Tip up Tail
    The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside.
  • Dorner AquaPruf Ultimate - USDA Certified

7600 Sanitary Modular Belt – Highest Level Of Sanitation

The Ultimate Series has been engineered for Fast & Effective Sanitation in the most demanding environments. These include facilities where food safety is essential, such as: RTE foods, raw protein (meat – poultry – fish), dairy and other environments with high pressure sanitation requirements.

Benefits of 7600 Ultimate AquaPruf Conveyor:

  • Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10′ long consist of multiple sections which are bolted together (can be welded together on site).
  • Bearings are mounted in cast stainless steel housing for maximum performance in washdown environments.
  • Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
  • The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
  • Solid Urethane belt is sprocket driven for consistent performance and has no bacteria harboring hinges or pins.
  • Open Belt Tracking Flanges and solid UHMW idler pucks create access to pulleys.
  • Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
  •  Drive sprockets are located on a 1.5″ square stainless steel shaft without fasteners to provide optimum drive strength and cleanability
  • Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
  • Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.
  • TIG welded stand offs keep fasteners out of the food zone.

 

Specifications

  • ​Load: 20 lbs/square-foot of belt 
  • Belt widths: 6″ to 36″ 
  • Lengths: 36″ to 40′ 
  • Belt speed: 233 ft/min maximum 
  • Solid urethane belting, includes belt scraper 
  • UHMW wear strip bed plate 
  • Continuous TIG welded 304 stainless steel frame 
  
  • #4 Polish on all frame surfaces 
  • Bearing material is 400 stainless steel 
  • Bearing lubricant is H1 type FDA lubricant 
  • USDA accepted belting 
  • Meets USDA, NSF & AMI design specifications 

Accessories

Guides
Transfers
Mounting & Hardware
Photo Eye Kits
Drip Pans
Infeed Chute
Angled Hopper

Manuals & Literature

Engineering ManualsPagesFile Size
Sanitary Overview528.34 MB

 

 LiteraturePagesFile Size
Sanitary Conveyors Line Card65.97 MB
 Dorner Sanitary Full Spec Rev. D 22425.7 MB
 AquaPruf Accessories Brochure 3 402 KB